Menu
Cart 0

2010-2013 Dodge 2500/3500 Long Arm Upgrade

  • 649.95


We are pleased to bring you our top of the line tubular design for:

2010-2013 Dodge 2500/3500 Long Arm Upgrade
Product Description: 
We are proud to bring you our Heavy Duty Tubular Long Arm Upgrade. Once you go above 4 inches of lift the stock location control arm angle creates a harsh ride and odd handling conditions as the axle is trying to pitch forward and backwards as the suspension cycles. Our kit relocates the arms down below the frame and also rearward to the transmission crossmember. The end result is a better than stock ride and killer looks. The truck pictured has 4 inches of lift and the angles are like stock! The lower arms are bent for tire clearance as well as aesthetics. These are completely bolt on once the OEM control arm brackets are removed. They require (4) holes to be drilled into the frame on each side and attach with 5/8" bolts which are included in the kit. There are a few other companies making a similar setup with boxed arms but this is the ORIGINAL design that has more correction than their setups.
 
Don't let the price fool you, our long arm kits come ready to install and are built from the highest quality materials. We use the same heavy wall DOM in the construction and rather than using heim joints that are noisy and seize/wear out quickly like some other bars on the market we use the same high quality high density polyurethane bushings found in our control arms. These bushings are grease able (Upon Request) , and just like our bars carry a lifetime warranty against failure.
*Please note that all kits are build to order, so please allow up to 30 days for your order to ship, as they are in higher demand than anticipated. We ask that you please be patient, and please reach out to us if you need to know the status of your order.

Product Finish: 
These are offered RAW, finished in a heavy black powder coating, or a custom color of your choice. This gives them elegance as well as extreme durability to the elements. We apply 10 mils of powder and bake at 400 degrees for no less than 20 minutes. The results are a finish that is capable of withstanding anything you can throw at it. 
*RAW(non powder coated) kits, as well as CUSTOM COLORED kits are available as shown in the photos, the upcharge for the custom color allows you to choose from any one stocking color or a color Prismatic Powders offers. (Translucent colors excluded do to lack of UV protection)
Ready To Install Kit Includes:
2 - Lower Control Arms
2 - Upper Control Arms
2 - Frame Brackets 
8 - Lower Bushings
8 - Upper Bushings
4- Lower Sleeves
4 - Upper Sleeves
8 - 5/8x5 Bolts & Lock Nuts
4 - 3/4x5 Bolts & Lock Nuts
1 - Instructions Sheet
Hardware: 
This particular kit comes complete with high quality zinc coated Grade 8 hardware which includes locking washers to ensure a fast and easy installed followed by a lifetime of trouble free use.
Instructions: 
All of our products come complete with detailed step by step install instructions to ensure installation is a breeze. Average install time for this kit is 60-90 minutes.
We are pleased to bring you our exclusive design Long Arm Upgrade for the: